SMT PARTS SUPPLY LTD
SMT PARTS SUPPLY LTD Establish Long-Term And Friendly Partnership
Add to Cart
Product characteristics:
Feeder calibration jig is a driver that used to confirm the FEEDER interval position (adsorption position) and adjust,it used the CCD camera and high magnification.,Observe feed condition by monitor,
The upper and lower movement of the thimble and the wear of the lever reduce the throwing problem caused by the poor material, It is very helpful to improve the rate.
1.The CCD camera uses the X-Y slider to move the position,And has the function of locking position.
2.CCD cameras and lenses are equipped with shields,To prevent damage to the CCD lens when the feeder is in and out.
3.The bottom plate adopts aluminum material, and the appearance is beautiful.
4.The column is made of aluminum alloy and has high stability.
5.The lens light source adopts annular light source, and the illumination effect is good.
6.The liquid crystal display is fixed on the device body, and the angle can be freely rotated so as to be convenient for observation in different positions.
Product specification:
| Drive way | AIR control (pneumatic control) |
| Expected feeding rate | The speed can be adjusted manually and automatically |
| Adjustment mode | The inner cross generator is adjusted with the X, Y and Z axes |
| Monitor | 14 inch display (10 inch LCD) |
| Jig | Available with different models |
| voltage | 110V 60HZ // 220V 50HZ |
| size | L500mm*W350mm*H520mm |
| weight | 36kg |